Exclusive Data Editing - Equator S-2 Metapace Hardware Manual

Editing Format 4
Enable Format 4
Editing Format 5
Enable Format 5

6.1.2 EXCLUSIVE DATA EDITING

By default, only barcodes found meeting with the criteria are processed by the editing
formats. Those found not meeting with the criteria are processed normally.
When "Exclusive Data Editing" is enabled, all barcodes read by the scanner must be
processed by the editing formats. If data is found excluded from all enabled editing
formats (= not meeting with the specified criteria), the scanner will not accept the
reading, and therefore, data will not be transmitted.
Yes
Chapter 6 Applying Formats for Data Editing
*Disable Format 4
*Disable Format 5
Update
*No
159