Entering Pin Code For Authentication; Use Preset Pin - Equator S-2 Metapace Hardware Manual

ENTERING PIN CODE FOR AUTHENTICATION

USE PRESET PIN

1) In the configuration mode, read the label below to use a preset PIN for
authentication.
Use preset PIN
2) Read one of the labels to specify the PIN code, in decimal or hexadecimal.
By default, the PIN code is set to "0000". Maximum 16 characters are allowed.
Enter PIN Code
in Hexadecimal ...
3) Read the "Decimal
193 for the desired digits or character string.
Read the "Clear PIN Code" label first if you need to re-input the PIN code.
Clear PIN Code
4) Read the "Validate" label to complete this setting.
Value" label on page 192 or the
Update
Appendix III Numeral Systems
Enter PIN Code
in Decimal ...
"Hexadecimal Value" label on page
Abort
195