Security; Setting The Administrator Password; Restricting Screen Access Using The Administrator Password - Huawei VP9050 User Manual

HUAWEI VP9050 Executive Video Terminal
User Guide

10.1 Setting the Administrator Password

You can set the administrator password to restrict access to certain screens.
To set the administrator password, do the following:
Step 1 Choose Settings > Security > Password, and then set the parameters listed in Table 10-1.
Table 10-1 Encryption parameters
Parameter
Administrator Password
Encrypt utilities
Encrypt diagnostics
Step 2 Save the settings.
----End
10.2 Restricting Screen Access Using the Administrator
Password
After the administrator password is set and certain screens are encrypted, users are required to
enter the administrator password to access these screens.
The administrator can encrypt the following screens:




Issue 03 (2011-12-10)
Settings screen
Utilities screen
Diagnostics screen
Customize Option Bar screen
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd
Description
The administrator password is left blank by default.
The password must consist of only letters (uppercase and
lowercase) and digits, with a maximum of 32 characters.
After this function is enabled, the administrator password must
be entered to access the Utilities screen.
After this function is enabled, the administrator password must
be entered to access the Diagnostics screen.
10

Security

10 Security
71