Setting Camera Input Parameters - Huawei VP9050 User Manual

HUAWEI VP9050 Executive Video Terminal
User Guide
Table 4-3 describes the specifications of the video output interfaces of the terminal. The
display contents vary with the interfaces to which the displays are connected. In the following
table, ① indicates local video; ② indicates local presentation; ③ indicates remote video;
④ indicates remote presentation.
Table 4-3 Specifications of the video output interface
Video Output
Interface
DVI/VGA
OUT
Use the cable that is provided to connect a display to the terminal based on the content to be
displayed and the interface on the display.
Table 4-4 Interfaces and cables
Interface → Format Required by a
Display
DVI-I interface → DVI format
DVI-I interface → SXGA/VGA
format
DVI-I interface → YPrPb format

4.2.3 Setting Camera Input Parameters

When cameras of certain models are used along with the terminal, the parameters for these
cameras must be set. For details about how to install and operate a camera, see the documents
provided in the camera package.
To set the input parameters of a camera connected to the terminal, do the following:
Step 1 Choose Settings > Video > Video Input.
Step 2 Select DVI/VGA IN.
Step 3 Set the parameters listed in Table 4-5.
Table 4-5 Camera input parameters
Parameter
Camera name
Issue 03 (2011-12-10)
Interface
Type
DVI-I
Please use the cables provided along with the terminal. Other cables may not be able to ensure the
desired quality. It is recommended that you contact the device supplier to purchase the relevant cables.
Description
This specifies the name of a camera. During a conference, you can
switch between cameras based on their names.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd
Output Video
Format Displayed
DVI, VGA,
①②③④
and YPrPb
Cable to Be Used
DVI extension cable
DVI-SXGA cable
DVI-YPrPb (component video) cable
4 Video Settings
Whether User
Interface Can Be
Displayed
Yes
29