Configuring The External Camera; Getting To Know The Video Input Interface; Getting To Know The Video Output Interface - Huawei VP9050 User Manual

HUAWEI VP9050 Executive Video Terminal
User Guide
Parameter
Display H.239
automatically
Small window
position
Step 4 Save the settings.
----End

4.2 Configuring the External Camera

In addition to the built-in camera, the terminal can also be connected to an external camera.
You can control a camera connected to the terminal and configure camera presets.

4.2.1 Getting to Know the Video Input Interface

The terminal supports various camera models, such as SONY EVI-HD1, CANON V50,
HUAWEI HD camera.
Table 4-2 describes the specifications of the video input interface.
Table 4-2 Specifications of the video input interface
Video Input
Interface
DVI/VGA IN

4.2.2 Getting to Know the Video Output Interface

When connecting displays to the terminal, choose cables based on the relevant interfaces.
Issue 03 (2011-12-10)
Description
This specifies whether the presentation is output from the LCD
interface automatically.
Only the LCD interface supports this function.
This specifies the position of the small window displayed on the
main screen. The small window can be displayed in the lower right
corner, lower left corner, upper right corner, or upper left corner.
By default, the small window is displayed in the lower right
corner.
To switch the layout to picture-in-picture mode, choose either of
the following methods:


Type
DVI-I
PTZ is an acronym for Pan, Tilt, and Zoom. A PTZ camera supports panning, tilting, and zooming
control.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd
From the option bar, select Layout and then
Press on the remote control consecutively until the layout
is switched to picture-in-picture mode.
Receivable Input Format Control
DVI, VGA, and YPrPb
4 Video Settings
.
Camera PTZ
28