Adjusting The Volume; Adjusting The Screen Layout - Huawei VP9050 User Manual

HUAWEI VP9050 Executive Video Terminal
User Guide
Parameter
Bass
Middle
Treble
Locally output sound
from AUDIO IN
AUDIO IN mixes with
MIC
Virtual surround
Virtual center channel
gain
Virtual surround gain
Distance for perceiving
virtual sounds

8.3 Adjusting the Volume

To obtain the optimal conference audio effect, you can adjust audio output in multiple modes.
If the terminal is in a conference, you can press
increase or decrease the volume heard at the local site. The volume from the PC and the
whole conference system is adjusted accordingly.
In PC mode, the terminal is used as a display. You cannot adjust the volume using the touch
panel or remote control.

8.4 Adjusting the Screen Layout

The screen layout can be adjusted using two methods. Press
switch between layouts. Alternatively, select Layout from the option bar to display a screen
from which a desired layout can be selected.
The LCD and DVI/VGA OUT video output interfaces support the combined picture function.
To adjust the screen layout, choose either of the following methods:
Issue 03 (2011-12-10)
For details about how to set the volume and other audio parameters, see chapter 5 "Audio Settings."

If a headset is used, you will hear conference audio through the headset.

Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd
Description
To obtain different audio effects, you can adjust the equalizers
by moving the sliders.
If this function is enabled, you can hear input from the AUDIO
IN interface at the local site.
This is used to output the AUDIO IN source to remote sites.
If this function is enabled, the terminal simulates multiple
speakers. In conjunction with Virtual center channel gain,
Virtual surround gain, Distance for perceiving virtual
sounds settings, this function enhances the surround sound field
effect.
This parameter gives the effect that sounds are coming from the
terminal's center. Drag the slider to adjust the volume.
This parameter adjusts the stereo sound effect.
This parameter sets the distance between conference participants
and the terminal speaker.
8 Video and Audio
or on the remote control to
on the remote control to
64