Uncovering The Lens; Starting/Shutting Down The System; Starting The System; Shutting Down The System - Huawei VP9050 User Manual

HUAWEI VP9050 Executive Video Terminal
User Guide

1.5 Uncovering the Lens




1.6 Starting/Shutting Down the System

Before starting the system, ensure that the power module and power cable are connected to
the corresponding devices properly.

1.6.1 Starting the System

Press the switch on the rear panel of the terminal.
After the terminal is powered on, it displays the startup logo and plays the startup music.

1.6.2 Shutting Down the System

Three modes are available to shut down the terminal:



Issue 03 (2011-12-10)
Do not remove the provided cover of the lens with force.
Do not touch the lens with fingers.
When the terminal is powered on, you can press the power switch on the rear panel to
power off the terminal.
You can press POWER
From the terminal's web interface, choose Maintenance > Shut Down. On the displayed
page, select Shut Down to power off the terminal and its display.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd
on the remote control
1 Installation and Preparation
10