Huawei VP9050 User Manual page 97

HUAWEI VP9050 Executive Video Terminal
User Guide
Figure 13-2 Upgrading multiple terminals at a time
Step 6 Enter the number of the terminals to be upgraded, 10 in this example, in the area that is
circled in red and marked as 1.
Step 7 Enter the IP addresses of the terminals to be upgraded in the area that is circled in red and
marked as 2.
Step 8 Click Upgrade.
----End
Upgrading Certain Selected Software Modules
You can upgrade certain selected software modules using the upgrade program installed on
the computer.
To upgrade certain selected software modules, do the following:
Step 1 Power on the computer and the terminal.
Step 2 Extract the compressed file of the upgrade software on the computer.
Step 3 Run UpgradeTool.exe to display the window as shown in Figure 13-1.
Step 4 Click Browser, and then find the file in .dat format.
Issue 03 (2011-12-10)
To increase upgrade efficiency when the network bandwidth is insufficient, press Ctrl+ALT+C in the
window as shown in Figure 13-2, and then set the upgrade policy in the displayed window.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd
13 Maintenance and Troubleshooting
86