Indicators; System Connection; Connecting The Terminal - Huawei VP9050 User Manual

HUAWEI VP9050 Executive Video Terminal
User Guide
This is the audio output interface of the terminal. It can be used to connect to the recording
and monitoring devices, such as a recorder.

1.3.2 Indicators

The indicator beside the keys on the front panel illuminates in one of three colors. Figure 1-3
shows the location of the indicator. Table 1-2 describes the indicator status.
Table 1-2 Description of the indicator status
Status
Slow blinking green
Steady green
Very slow blinking green
Fast blinking green
When the terminal is running, check whether the indicator is green and steady on.

1.4 System Connection

This section describes how to install the system. Please follow these precautions before
connecting：




1.4.1 Connecting the Terminal

Connect the system in the sequence
Issue 03 (2011-12-10)
If you need to purchase the optional components, the diameter of the headset, microphone, and audio

cable connector should be 3.5 mm.
If the AUDIO OUT jack is connected to an external audio device, do not place the audio device near

the embedded microphone to avoid the spontaneous phenomenon.
Before connecting any components, disconnect the power supply.
It is recommended to use the provided power module, power cable, and other cables.
Do not connect the cables with wet hands.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd
Description
The terminal is starting up, or the software is
upgrading.
The terminal is operating properly.
The terminal is in sleep mode or in a conference.
The terminal is faulty.
– .
1 Installation and Preparation
7