Table of Contents
Advertisement
Troubleshooting
Action
Step 2
a
From the printer control panel, set the paper type, texture and weight
in the Paper menu to match the paper loaded in the tray.
b
Resend the print job.
Is the tray set to the type, texture, and weight of the paper loaded?
Step 3
a
Depending on your operating system, specify the paper type, texture
and weight from Printing Preferences or from the Print dialog.
b
Resend the print job.
Is the print still too dark?
Step 4
Check if the paper loaded in the tray has texture or rough finishes.
Are you printing on textured or rough paper?
Step 5
a
Load paper from a fresh package.
Note: Paper absorbs moisture due to high humidity. Store paper in
its original wrapper until you use it.
b
Resend the print job.
Is the print still too dark?
Step 6
Replace the imaging unit, and then resend the print job.
Is the print still too dark?
Yes
No
Go to step 3.
Do one or more of the
following:
Go to step 4.
The problem is solved.
From the printer
Go to step 5.
control panel, change
the texture settings in
the Paper Texture
menu to match the
paper you are printing
on.
Go to step 6.
The problem is solved.
Contact
technical
The problem is solved.
support.
135
•
Specify the paper
type, texture, and
weight from the
tray settings to
match the paper
loaded in the tray.
•
Change the paper
loaded in the tray
to match the paper
type, texture and
weight specified in
the tray settings.
Advertisement
Table of Contents
