Download  Print this page

Understanding The Colors Of The Sleep Button And Indicator Lights; Using The Embedded Web Server - Dell B2360d-dn User Manual

Laser printer.
Hide thumbs


Table of Contents
Learning about the printer
Understanding the colors of the Sleep button and indicator
The colors of the Sleep button and indicator lights on the printer control panel signify a certain printer status or condition.
Indicator light
Blinking green
Solid green
Blinking red
Sleep button light
Solid amber
Blinking amber
Blinking amber for 0.1 second, then goes
completely off for 1.9 seconds in a slow,
pulsing pattern

Using the Embedded Web Server

Note: This feature is available only in network printers or printers connected to print servers.
If the printer is installed on a network, then you can use the Embedded Web Server to do the following:
View the virtual display of the printer control panel.
Check the status of the printer supplies.
Configure supply notifications.
Configure printer settings.
Configure network settings.
View reports.
To access the Embedded Web Server for your printer:
Obtain the printer IP address:
From the TCP/IP section in the Network/Ports menu
By printing a network setup page or menu settings page, and then finding the TCP/IP section
An IP address appears as four sets of numbers separated by periods, such as
If you are using a proxy server, then temporarily disable it to load the Web page correctly.
Open a Web browser, and then type the printer IP address in the address field.
Press Enter.
The Embedded Web Server page appears.
Printer status
The printer is off or in Hibernate mode.
The printer is warming up, processing data, or printing.
The printer is on, but idle.
The printer requires user intervention.
Printer status
The printer is off, idle or in Ready state.
The printer is in Sleep mode.
The printer is entering or waking from Hibernate mode.
The printer is in Hibernate mode.


Table of Contents

   Also See for Dell B2360d-dn

   Related Manuals for Dell B2360d-dn

This manual is also suitable for:


Comments to this Manuals

Symbols: 0
Latest comments: