Connecting An External Battery - HP Kayak XA User Manual

mamdt.bk : mamdt3.fb4 Page 75 Tuesday, August 5, 1997 4:20 PM
WARNING
Connecting an External
Battery

Connecting an External Battery

There is a danger of explosion if the battery is incorrectly installed. For
your safety, never attempt to recharge, disassemble, or burn the old
battery. Replace the battery only with the same or equivalent type
recommended by the manufacturer. The battery is a lithium battery
which does not contain heavy metals. Nevertheless, in order to protect
the environment, do not dispose of batteries in household waste.
Please return used batteries to the shop from which you bought them,
or to the dealer from whom you purchased your PC Workstation, or to
HP, so that they can be either recycled or disposed of in an
environmentally sound way. Returned batteries will be accepted free
of charge.
If the installed battery stops working, you can install an external
battery in the PC Workstation. You can order this from your
HP-authorized reseller. The battery is not covered by the HP Warranty.
1 Remove the computer's cover (refer to page 27).
2 Connect the external battery cable to the battery connector on the
system board.
3 Mount the external battery as shown below, using the self-adhesive
strip supplied.
Step 3
Step 2
4 Replace the computer's cover and run the Setup program to
reconfigure the computer.
3 Troubleshooting Your PC Workstation
Connecting an External Battery
English 75