HP Kayak XA User Manual page 55

mamdt.bk : mamdt2.fb4 Page 45 Tuesday, August 5, 1997 4:20 PM
10 Pull the PC Workstation's data cable through the front drive bay area
and connect it to the rear of each drive. The connectors are shaped
to fit one way only. If you are not sure which connector to use, refer
to page 35.
IDE (CD-ROM) Data cable
11 Using both hands, lift the drive unit and slide it back into the
computer about halfway.
12 Move the power supply unit (refer to page 29) and place it upside
down on the front drive unit.
13 Connect the power cable to the rear of each drive. The connectors
are shaped to fit one way only.
2 Installing Accessories in Your PC Workstation
Installing Mass Storage Devices
Top mounting bracket
English 45