Starting And Stopping Your Pc Workstation; Starting Your Pc Workstation; Changing The Boot Order - HP Kayak XA User Manual

mamdt.bk : mamdt1.fb4 Page 14 Tuesday, August 5, 1997 4:20 PM
NOTE
1 Setting Up and Using Your PC Workstation

Starting and Stopping Your PC Workstation

Starting and Stopping Your PC Workstation
If you are starting your PC Workstation for the first time, refer to page
15.

Starting Your PC Workstation

1 Before you start your PC Workstation, first turn on the display.
2 Start your PC Workstation in one of these ways:
Press the power button on the front panel.
•
Press the keyboard space bar.
•
The keyboard power-on feature only works if it is enabled via the
Power menu in the Setup program (refer to page 87 for more
information about the Setup program) and the system board
switch 8 is CLOSED, which is the default setting (refer to page
86).
When you turn on the PC Workstation, it carries out the Power-On-
Self-Test (POST) while the PC Workstation's logo is displayed. If
you wish to view the POST details, press
Summary Screen. If there is an error in the POST, the error is
automatically displayed. For details, refer to page 59.
3 If you have set a password in the Setup program, the password
prompt is displayed when the POST has been completed. If the
Password prompt is displayed, type your password and press
to be able to use the PC Workstation.

Changing the Boot Order

If you wish to change the device from which the PC Workstation boots
(starts), just for the current boot, press
test (POST). You can then select the device from which you want to
boot.
14 English
to get the HP
during the power-on self