Installing Video Memory - HP Kayak XA User Manual

mamdt.bk : mamdt2.fb4 Page 33 Tuesday, August 5, 1997 4:20 PM

Installing Video Memory

Your PC workstation is supplied with video memory integrated on the
system board (2 MB). You also have a video memory module (2 MB)
installed in the video memory upgrade socket, giving you 4 MB in total.
You can increase the total amount of video memory installed from 4 MB
to 6 MB. To do this, you need to remove the 2 MB module and replace it
with a 4 MB module.
To install a video memory module:
1 Turn off the display and computer, and disconnect the power supply
cords and any connection to a telecommunications network.
2 Remove the computer's cover (refer to page 27).
3 If there is an accessory board preventing access to the video memory
upgrade socket, you must remove it first (refer to page 52).
4 There is a 2 MB video memory module already installed in the video
memory upgrade socket, so you must remove this first:
a Grip it firmly between your thumb and index finger.
b Carefully slide the module out of the socket.
2 Installing Accessories in Your PC Workstation
Installing Memory
English 33