mamdt.bk : mamdt2.fb4 Page 46 Tuesday, August 5, 1997 4:20 PM
2 Installing Accessories in Your PC Workstation
Installing Mass Storage Devices
14 Replace the power supply unit. Then push the front drive unit fully
into the PC Workstation until the two retaining clips click into place.
15 Retrieve the generic filler from the PC Workstation's chassis by
opening the two clips.
16 Remove the existing filler from the front panel and replace it with the
generic filler to give access to the newly installed drive.
17 Install any other accessories before replacing the cover. Reconnect
all cables and power cords.
18 Refer to page 47 to complete the installation.
46
English