Adapter Setup Menu - HP Kayak XA User Manual

mamdt4.fb4 Page 98 Tuesday, August 5, 1997 5:25 PM
S-SCAM Support
P-Parity
NOTE
4 Technical Information
Using the SCSI Configuration Utility

Adapter Setup Menu

When you select Adapter Setup from the Adapter Utilities menu, the
Adapter Setup menu is displayed:
Symbios Logic SCSI Configuration Utility
1. SYM53C875
Adapter Setup
S-SCAM Support
P-Parity
I-Host SCSI ID
O-Scan Order
F1 .. Help.
F2 .. Restore Default Setup.
ESC .. Exit this menu.
Use arrow keys to select from menu. Then press ENTER
The settings in this menu are global settings that effect the selected
host adapter and all SCSI devices attached to it.
The Symbios Logic BIOS version 4.x and above supports the SCSI Plug
and Play protocol called SCAM (SCSI Configured AutoMatically). You
can turn this off if you wish.
Symbios Logic PCI to SCSI host adapters always generate parity, but
some SCSI devices do not. For this reason you can disable parity
checking.
When disabling parity checking, you may have to disable disconnects for
certain devices as parity checking for the reselection phase is not
disabled. If a device does not generate parity, and it disconnects, the I/O
never completes because the reselection never completes.
98 English
Version 1.07
On
Enabled
7
Low to High (0..Max)
BIOS Code Segment: C800