HP Kayak XA User Manual page 54

mamdt.bk : mamdt2.fb4 Page 44 Tuesday, August 5, 1997 4:20 PM
2 Installing Accessories in Your PC Workstation
Installing Mass Storage Devices
5 Push the two catches on the front drive unit down and then slide the
unit out, holding it with both hands.
6 Carefully place the unit on its side and remove the top mounting
bracket. Remove the metal filler plate from the empty shelf if there
is one.
7 If the drive to be installed has a tray, attach the drive to the tray.
Many devices, such as the HP Zip drive, require an HP-supplied tray
before they can be installed.
Attach drive to tray
(Example shows Zip drive)
8 Lower the drive into the free groove of the mounting bracket (ensure
that the top of the drive is facing the right way). Use the two pins on
the mounting bracket to slot the drive into place.
9 Position the other mounting bracket on top, aligning it properly so
that it clicks into place.
44 English