Table 1-2. Startup Overview (Continued)
What you need to do...
Note that the debugger
initializes the MVME2603/
2604.
Initialize the system clock.
Examine and/or change
environmental parameters.
Program the board as needed
for your applications.
Unpacking Instructions
Note
Unpack the equipment from the shipping carton. Refer to the
packing list and verify that all items are present. Save the packing
material for storing and reshipping of equipment.
Avoid touching areas of integrated circuitry; static
!
discharge can damage circuits.
Caution
Hardware Configuration
To produce the desired configuration and ensure proper operation
of the MVME2603/2604, you may need to carry out certain
hardware modifications before installing the module.
Using the Debugger
You may also wish to obtain the PPCBug
Firmware Package UserÕs Manual, listed in
Appendix A, Related Documentation.
Using the Debugger, Debugger Commands, the
SET command
CNFG and ENV Commands
MVME2600 Series Single Board Computer
ProgrammerÕs Reference Guide, listed in Appendix
A, Related Documentation.
If the shipping carton is damaged upon receipt, request
that the carrier's agent be present during the unpacking
and inspection of the equipment.
Hardware Preparation and Installation
Refer to...
1
On page...
5-3
A-1
5-6
6-2
and/or 6-3
A-1
1-5