Fcc Compliance - Motorola MVME2603-1121A Installation And Use Manual

FCC Compliance

The MVME2603/2604 Single Board Computer was tested in an
FCC-compliant chassis and meets the requirements for Class A
equipment. FCC compliance was achieved under the following
conditions:
For minimum RF emissions, it is essential that the conditions above
be implemented. Failure to do so could compromise the FCC
compliance of the equipment containing the module.
Shielded cables on all external I/O ports.
Cable shields connected to earth ground via metal shell
connectors bonded to a conductive module front panel.
Conductive chassis rails connected to earth ground. This
provides the path for connecting shields to earth ground.
Front panel screws properly tightened.
Specifications
B
B-3