Table of Contents
Advertisement
Block Diagram
3
MVME761 Transition Module
3-24
Socket-mounted SCSI terminating resistors for end-of-cable
or middle-of-cable configurations
Provision for modem connection
Green LED for SCSI terminator power; yellow LED for
Ethernet transceiver power
The features of the P2 adapter board include:
A 50-pin connector for SCSI cabling to the MVME712M
and/or to other SCSI devices
Socket-mounted SCSI terminating resistors for end-of-cable
or middle-of-cable configurations
Fused SCSI teminator power developed from the +5Vdc
present at connector P2
A 64-pin DIN connector to interface the EIA-232-D, parallel,
SCSI, and Ethernet signals to the MVME712M
The MVME761 transition module
board are used in conjunction with the following models of the
MVME2603/2604 base board:
MVME2603-1121A
MVME2603-1131A
MVME2603-1141A
MVME2603-1151A
MVME2603-1161A
The features of the MVME761 include:
A parallel printer port (IEEE 1284-I compliant)
An Ethernet interface supporting 10Base-T/100Base-TX
connections
Two EIA-232-D asynchronous serial ports (identified as
and
on the front panel)
COM2
(Figure
1-12) and P2 adapter
MVME2604-1121A
MVME2604-1131A
MVME2604-1141A
MVME2604-1151A
MVME2604-1161A
COM1
Hide quick links:
Advertisement
Table of Contents
