Removing The Processor Fan 2 - Fujitsu PRIMERGY Econel 200 S2 Options Manual

Removing the processor fan 2

4.2 Removing the processor fan 2
For the installation of additional memory modules or installation of a second
processor the processor fan 2 has to be removed.
Ê Remove the side cover as described in
page 17.
Figure 3: Removing the processor fan 2 cable
Ê Disconnect the plug of the processor fan cable from the system board
(connector Fan2 CPU, see circle).
18
section "Opening the server" on
Options Guide
Preparation
Econel200 S2