Expansions And Conversions - Fujitsu PRIMERGY Econel 200 S2 Options Manual

Introduction

Expansions and conversions

1.2 Expansions and conversions
Second processor
The server can be upgraded to a so-called dual processor system. A dual
processor system needs a multi processor operating system. The second
processor must have the same type and clock rate as the first.
Extension of the main memory
The system board supports up to 8 Gbyte main memory. 4 slots (2 banks with
2 modules) are available for the main memory. Each memory bank can be
populated with 512 Mbyte, 1 Gbyte or 2 Gbyte FBD533/PC2-4200F Fully
Buffered DIMM memory modules. You find further information on the main
memory in the Technical Manual for the system board D2530.
Additional accessible drives
Three free 5.25-inch bays are available for additional accessible drives
(DVD-ROM, CD-RW/DVD, DVD-RW or tape backup drive).
The lowest bay can be equipped with a 5-inch multibay. In this multibay a
1.44 MB floppy disk drive and a slimline drive (CD-RW/DVD, DVD-RW) can be
installed.
Hard disk drives
Up to four SATA hard disk drives can be installed. One SATA hard disk drive is
already installed in the base unit.
Expansion boards in the PCI slots
The system board offers:
– 3 x PCI-X (133/100 MHz) slots
– 1 x PCI 33 MHz slot
– 1 x PCI-Express x16 slot (x8 wired)
– 1 x PCI-Express x8 slot (x4 wired)
Options Guide 7
Econel200 S2