Main Memory; Slot Population Rules - Fujitsu PRIMERGY Econel 200 S2 Options Manual

6

Main memory

V
CAUTION!
Refer to the safety notes in
The system board supports up to 8 Gbyte main memory. Four slots are available
(two slots each form a memory bank) for the main memory. Each memory bank
can be populated with two 512 Mbyte, 1 Gbyte or 2 Gbyte FBD533/PC2-4200F
Fully Buffered DIMM memory modules.
The basic unit includes the first memory bank populated either with
1x 512 Mbyte, 2x 512 Mbyte, 2x 1 Gbyte or 2x 2 Gbyte.
ECC with memory scrubbing and with Single Device Data Correction
(SDDC, Chipkill) function is supported.
6.1

Slot population rules

Figure 12: Structure of the main memory in memory banks and memory modules
The modules capacity can be different for the different memory banks: e.g. pair
1A/1B can be populated with two 512 Mbyte modules and pair 2A/2B with two
1 Gbyte modules.
Econel200 S2
chapter "Safety notes" on page 11
DIMM 2B
DIMM 1B
DIMM 2A
DIMM 1A
Options Guide
et seq. .
29