Fujitsu PRIMERGY Econel 200 S2 Options Manual page 31

Main memory
2
Figure 13: Installing a memory module
Ê Push the holder on each side of the memory slot outward.
Ê Insert the memory module in the slot (1) while folding the side holders up
until the memory module engages (2).
Ê Install the traverse with the memory air duct as described in
"Installing the memory air duct" on page
Ê Install the system fan as described in
page 51.
Ê Install the processor fan 1 as described in
fan 1" on page
Ê Install the processor fan 2 as described in
fan 2" on page
Ê Close the server, connect it to the mains, and switch it on as described in
section "Closing the server" on page 53
Econel200 S2
49.
52.
Options Guide
Installing/removing main memory
1
50.
section "Installing the system fan" on
section "Installing the processor
section "Installing the processor
et seq. .
2
section
31