Hard Disk Drives; Installing Sata Hard Disk Drives - Fujitsu PRIMERGY Econel 200 S2 Options Manual

8

Hard disk drives

V
CAUTION!
Refer to the safety notes in
Up to four SATA hard disk drives can be installed. One SATA hard disk drive is
already installed in the base unit.
8.1

Installing SATA hard disk drives

Ê Remove the side cover as described in
page 17.
You find the necessary pre-mounted EasyClick rails in the drive cage.
Ê Remove the EasyClick rails from the next free bay of the hard disk drive cage
(installation sequence from above downward).
Ê Unpack the new drive, and make the desired settings. You should read the
accompanying documentation supplied with the drive beforehand.
Econel200 S2
chapter "Safety notes" on page 11
section "Opening the server" on
Options Guide
et seq. .
41