Fujitsu PRIMERGY Econel 200 S2 Options Manual page 15

Note about the laser
The CD/DVD drive is classified for laser class 1 according to IEC 60825-1.
V
CAUTION!
The CD/DVD drive contains a laser diode (LED). Sometimes the LED
produces a stronger laser beam than laser class 1. Direct view into the
laser beam is dangerous.
Never remove parts of the CD/DVD drive assembly!
Modules with electrostatic-sensitive components:
Systems and components that might be damaged by electrostatic discharge
(ESD) are marked with the following label:
Figure 1: ESD label
When you handle components fitted with ESDs, you must observe the following
points under all circumstances:
Remove the power plug from the power socket before inserting or removing
components containing ESDs.
You must always discharge yourself of static charges (e.g. by touching a
grounded object) before working.
The equipment and tools you use must be free of static charges.
Use a grounding cable designed for this purpose to connect yourself to the
system unit as you install components.
Only touch the components at the positions highlighted in green (touch
point).
Do not touch any exposed pins or conductors on a component.
Econel200 S2
Options Guide
Safety notes
15