Procedure - Fujitsu PRIMERGY Econel 200 S2 Options Manual

2

Procedure

V
CAUTION!
The actions described in these instructions should only be performed by
technical specialists. Equipment repairs should only be performed by
service personnel. Any unauthorized opening and improper repairs could
expose the user to risks (electric shock, energy hazards, fire hazards)
and could also damage the equipment. Please note that any unautho-
rized opening of the device will result in the invalidation of the warranty
and exclusion from all liability.
Ê First of all please familiarize yourself with the safety instructions in the
chapter "Safety notes" on page 11
Ê Ensure that all required manuals (see
server" on page
will definitely need the Operating Manual for the server and the Technical
Manual for the system board.
Ê Shut down the server correctly, switch it off, pull out the power plug, and
open the server as described in the
seq. .
Ê Extend or upgrade your server as described in the relevant chapter.
Ê Close the server, connect it to the power outlet, and switch it on as described
in the chapter "Completion" on page 49
Ê Start the operating system and, if necessary, configure it as required (see
Operating Manual).
Econel200 S2
5) are available, printing out the PDF files if necessary. You
Options Guide
et seq. .
"Additional documentation about the
chapter "Preparation" on page 17
et seq. .
et
9