Matrix SETU VFX88L Quick Start Manual page 14

• Send CLI:
• Feature allows you to restrict the CLI while making a call through SIP
Account.
• By default, Send CLI flag is enabled for all SIP Accounts
• Disable the flag if CLI is to be restricted.
• Black Listed Callers:
• Feature allows you to reject the calls from particular users i.e Black
listed numbers.
• By default, Number List 03 is assigned and all numbers are allowed
through all SIP Account.
• If you want to restrict any numbers through any SIP account during
incoming call on that SIP account, program the numbers which is to
be restricted in the Number Lists.
• Assign this number list to the SIP Accounts where it should be
restricted.
• If you do not want to use this feature, disable the Apply flag.
• Automatic Number Translation (ANT):
• Feature allows you to modify/substitute the called party number to the
number compatible to be out dialed on SIP Account.
• Program 2 number lists viz. Dialed and Substitute Number list and
assign these Number lists to the SIP Account.
• If you do not want to use this feature, disable the Apply flag.
• Routing Type:
• Feature allows you to select the routing method to be used when
there is any incoming call on SIP Account.
• Following Routing types are supported for each SIP Account:
• All Calls
• Called Number Based
• For "All Calls" Routing type:
• FXS Port Routing Group:
•
•
•
• CLI Number on FXS port:
•
•
•
• By default, Received Calling Party Number would be displayed as
Click the link "FXS port Routing Groups" and the webpage
will open.
Program the FXS port number in the routing group on which
the call should be placed when there is call for the SIP
account.
Assign that FXS Port Routing group number to the SIP
account.
Two different options are supported for displaying the CLI on
FXS port:
Received Calling Party
Received Called Party