Matrix SETU VFX88L Quick Start Manual page 10

Step 3: Assigning Subnet Mask
• Enter into the programming mode by following the step 1 i.e "Entering
into the Programming mode".
• Dial the SE command 12-Subnet Mask-#*.
• For example, if the subnet mask 255.255.255.0 is to be programmed,
the SE command shall be given as, 12-255255255000-#*.
• SETU VFX88L will restart once you enter this command.
• Access the Webjeeves of the SETU VFX88L
• Open the Web browser/Internet Explorer.
• Enter the IP address of the SETU VFX88L Network Port in the URL
field of the Web browser/Internet Explorer and press Enter key.
• The SETU VFX88L will prompt for login as shown below:
• Enter the SE Password (default: 1234) in the 'Password' field.
• Click on the 'Login' button.
• On successful login, you will be taken to the Home Page.