Matrix SETU VFX88L Quick Start Manual page 12

• By default, Status for all SIP Accounts is 'Disabled'.
• Program following parameters for registering SIP Account to ITSP:
• Enable the SIP Account Status
• Program following parameters as given by the ITSP:
• SIP User ID
• Registrar Server Address
• Registrar Server Port
• Authentication User ID
• Authentication User Password
• Outbound Proxy
• Program following parameters for Peer-to-Peer application:
• Enable the SIP Account Status
• SIP User ID:
• By default, SIP User ID is programmed as '*'.
• Program SIP User ID only if you want to assign particular SIP
account to a fixed FXS port or group of FXS port i.e if particular
number (programmed as SIP User ID) is dialed by the remote
end, it should route to FXS port 1 only or to FXS port 1 to FXS
port 4, etc.
• Source Port IP Address
• Options supported are as given below:
•
•
•
• By default, 'Use Network Port IP Address' is programmed.
• Program this parameter if Peer-to-Peer application is to be used
and SETU VFX88L is connected behind the NAT.
Use Network Port IP Address
Use IP Address fetched using STUN
Use Router's Public IP Address