Front bodyside panel screws
Storage Drawer
Removing the storage drawer front panel:
1. Remove two screws from the upper inside panel.
Two inside screws
2. Remove two screws from the bottom edge of the
panel.
Two bottom edge screws
Removing inside drawer panel:
1. Remove four screws, two on each side holding the
inner panel to the drawer.
Two screws on each side
Removing storage drawer glides:
There are four drawer glides mounted to the drawer, one
on each side in the front and one on each side in the
rear:
1. Press in on the locking tab and pull the glide from
the drawer.
Locking tab
There are also two drawer glides mounted to the frame
of the range, one on each side in the front.
Drawer glide
1. To remove the glide it is necessary to get behind the
frame of the range.
84