Table of Contents
Advertisement
Fig.2
Change Default IP Network:
Step 3: After successfully logon to the system, we need to change the
network configuration. Click Device Setting > Network to setup the service
network interface (WAN) parameters. Enter the desired IP address, Subnet
mask and default gateway or select "DHCP" or "PPPOE". Apply the change by
clicking Apply button as fig (Fig.3).
Note: If your WAN port are setting in the 10.x.x.x segment IP address, please
make sure that you also need to change the LAN port to other segment such as
192.168.x.x
(Fig.3)
8
Advertisement
Table of Contents
