Table of Contents
Advertisement
IPV6 IP Address: IPV6 address
IPV6 IP Gateway: IPV6 default Gateway
IPV6 IP Prefix Length: IPV6 prefix length
DNS Server1: Primary DNS Server IP network
DNS Server2: Secondary DNS Server IP network
VOIP VLAN: Enable VOIP VLAN or not. When enable VOIP VLAN, the
WAN port can be only accessed by VLAN. If it is required to manage the
Dynamix 25xx, Administrator can use LAN port to access this gateway
instead.
VOIP VLAN ID(2-4096): VLAN ID Used can be used range.
Note: the default WAN IP address is 10.1.1.3.
LAN Setting:
Voice gateway mode: This LAN port is used for management purpose, not
used for register to SIP Server or data/voice routing.
NAT mode: DHCP function on the LAN port. The LAN port functions as a DHCP
server, network devices connected to them will be assigned one IP addresses
according to DHCP server IP range. (Please refer to command "NAT setting" on
the left side commands how to define DHCP IP address.)
IP Address
using 10.x.x.x IP segment).
Netmask: IPV4 network subnet mask
IPV6 IP Address: IPV6 address
IPV6 IP Prefix Length: IPV6 prefix length
Bridge mode: At this mode, both WAN and LAN ports are configured to
Switch/Hub features. LAN port access to WAN port directly.
Note: default LAN IP address is 192.168.123.123
DDNS (DynDNS) Setting:
DDNS (DynDNS): enable or disable dynamic DNS feature.
Domain Name: input your Domain Name
User Name: input your user name
Password: input your password
IPV4 address (please set to 192.168.x.x if your WAN port is
:
13
Advertisement
Table of Contents
