Appendix C --- Http Auto Provisioning - Dynamix FXS-04 User Manual

Appendix C --- HTTP auto provisioning

Get the http provision packet from Welltech and start the provision as follows:
Step 1: build mac list for mass configuration file generation
Please open the "wg2504 MAC.csv or wg2540 MAC.csv" which was provided
from Welltech by using Microsoft Excel. You can refer to the picture below.
Normally, you should get all required configuration mac list from Welltech and
use it for configuration file generation if you have ordered a bulk of quantity.
For FXS>
The wg2504 MAC.csv contains most frequently changed parameters as
follows:
MACAddress: Dynamix 25xx MAC Address
fxs1.displayname ~ fxs4.displayname: display name for each line
fxs1.password ~ fxs4.password: user password for register to SIP proxy
for each line
fxs1.telno ~ fxs4.telno: telephone number for each line
fxs1.userid ~ fxs4.userid: user id for register to SIP proxy for each line
For FXO>
The wg2540 MAC.csv contains most frequently changed parameters as
follows:
MACAddress: Dynamix 2540 MAC Address
Siptk1.displayname ~ siptk4.displayname: display name for each line
Siptk1.userid ~ siptk4.userid: user id for register to SIP proxy for each line
siptk1.password ~ siptk4.password: user password for register to SIP
proxy for each line
Siptk1.telno ~ siptk4.telno: telephone number for each line
Please save and close it.
65