Table of Contents
Advertisement
Step 2: create a template configuration file
Open the "wg2504 Parameter.txt" or "wg2540 Parameter.txt" which was
provided by Welltech and make the required changes. Please make some
changes for those provision and SIP proxy settings at least. For details, please
refer to the comments of "wg2504 Parameter.txt" or "wg2504 Parameter.txt".
Step 3: Make the changes for "wegencfg.ini" as follows if it is
necessary
# Template File
BaseFile=.\wg2504 Parameter.txt
# MAC list file
ListFile=.\wg2504 MAC.csv
# 0: Off, 1: On
Encrypt=0
Or
# Template File
BaseFile=.\wg2540 Parameter.txt
# MAC list file
ListFile=.\wg2540 MAC.csv
# 0: Off, 1: On
Encrypt=0
Step 4: Generate the individual configuration file.
Double click the "wtgencfg.exe", it will generate the configuration file for
each MAC list in "MAC address.cfg" as the following pictures.
66
Advertisement
Table of Contents
