Dynamix FXS-04 User Manual page 40

Digit Manipulation>
The Digit Manipulation (DM) will be processed based on prefix and DM
group after the DNIS is determined.
DM Group: Different DM group have different case to be used.
Matched Prefix: The prefix to be matched for DM. The longest prefix
will be matched first.
Matched Length: Set to 0 to ignore the length. The other 1-32 are the
digit length to be matched as a condition.
Start Pos: The start digit position to be replaced.
Stop Pos: The stop digit position to be replaced.
Replace Value: The value to be replaced.
Example of Digit Manipulation Settings:
Prefix Len
886 0
886 12
886 0
886 0
886 0
FXO: This DM group is used for FXO 2 stages dialing. After the
DNIS (Called party messages) is collected, this DM group will
be processed before enter the routing procedure.
VOIP: This DM group is used for VOIP incoming call. After the
DNIS is collected in 2 stages dialing or 1 stage dialing DNIS,
this DM group will be processed before entering the routing
procedure.
1-4: These DM groups are used for backup routing purpose.
When a backup routing is used, the administrator can select a
DM group to be processed before starting the backup route.
Start Stop Replace
Pos Pos Value
0 0 002
0 0 002
2 5 002
30 30 002
1 6
Test DNIS
8862123456
8862123456
8862123456
8862123456
8862123456
40
Result DNIS
0028862123456
8862123456
8800223456
8862123456002
83456