Table of Contents
Advertisement
Check Dynamix 25xx Registration Status:
Step 9: After soft-reset or reboot.
>Click Status > SIP Trunk Status to check whether registration was
successful or not. (Fig.9.1)
>Click line status to check registration status. (Fig.9.2)
Through the above settings, the Dynamix 25xx should be able to do the
following features:
For FXO: (2 stage dialing use)
1. For PSTN incoming call, the caller will hear a dial tone. Then the caller can
dial a VOIP number and it will use the setup SIP Trunk 1 to make SIP call
out.
2. For VOIP incoming call, FXO-04 will off hook a FXO port and dial to
PSTN Phone.
For FXS:
1. The user can pick up the handset and hear dial tone. Call out and talk.
2. For VOIP incoming call to a dedicated FXS number, this phone will ring and
can answer to talk.
(Fig.8)
(Fig.9.1)
(Fig.9.2)
11
Advertisement
Table of Contents
