Table of Contents
Advertisement
Audio>
The setting page includes the device related audio settings.
RFC 2833 Payload Type: 96 or 101. It is recommended to use 101.
DTMF Send On Time(msec): When generate DTMF, the DTMF ON
time will be sent (default value is 70 ms)
DTMF Send Off Time(msec): When generate DTMF, the DTMF OFF
time will be sent (default value is 70 ms)
DTMF Detect Min on Time (msec): The minimum DTMF ON time
period will be processed as a regular DTMF event. A smaller ON time
than this will be ignored. The default value is 60ms.
DTMF Detect Min off Time (msec): The minimum DTMF OFF time
for the same DTMF value. A smaller OFF time than this and the new
DTMF digit is the same as previous one will be handled as 1 digit
only(same digit and not a new digit).
DTMF Relay Volume: The DTMF relay volume
T.38 Fax Volume: The T.38 fax relay volume
T.38 Redundant Depth: The T.38 redundant packet depth. It could 0
(no redundant), 1 or 2. It is recommended to set to 2.
T.38 ECM: The t.38 error correction mode. Default value is ON.
Min Jitter Buffer (msec): The minimum delay time of Jitter buffer.
Max Jitter Buffer (msec): The Maximum delay time of Jitter buffer.
Max Echo Tail Length (G.168): Enable the echo cancellation feature.
The default setting is "128ms".
Jitter Opt. Factor: Jitter buffer dynamic factor for optimize. Please
set to 7 unless under Dynamix 's instruction to change.
36
Advertisement
Table of Contents
