Table of Contents
Advertisement
Matched Incoming List: matched DNIS incoming interface target
Matched Length: matched DNIS (called number) length
Outgoing Type: The outgoing call type (FXS or VOIP)
Create Route Plan>
Click Route Plan and Click new to create a new routing policy.
For FXO>
Incoming Call Type: Incoming call type
Matched Prefix: matched DNIS (called number) prefix
Matched Incoming List: matched DNIS incoming interface target
Matched Length: matched DNIS (called number) length. For ignoring
the length, please set to 0.
No Answer Timeout: How long the hunting will continue to next
when the called target doesn't answer.
Create Route Plan>Primary Route
Outgoing Type: Outgoing call type (FXO or VOIP)
VOIP: The incoming SIP call type
FXO: The PSTN incoming call type
For VOIP incoming call type, the incoming target will be
the SIP trunk ID. Only the call from the selected SIP
Trunk will be accepted for this route.
For PSTN incoming call type, the incoming target will be
the line ID (L1 to L4). Only the call is coming from the
selected line will be accepted for this route.
54
Advertisement
Table of Contents
