Table of Contents
Advertisement
Select Http:
This feature is ready to use now.
Http Configuration: Enable or Disable
Http Config URL: internal used only
Refresh interval(minute): interval to check whether have a new
configuration/firmware or not in minutes
User ID: specify the login id for http authentication
Password: specify the password for http authentication
>SNMP
SNMP Agent:
SNMP Agent: Enable SNMP or not.
Read Only Community Name: The community name to read through
SNMP protocol
Read Write Community Name: The community name to read and
write through SNMP protocol.
SNMP Agent Access on WAN: Enable SNMP to be accessed through
WAN port or not.
Trusted Peer:
Type:
Any Address: Any address can retrieve the SNMP information.
Specify an IP Address: Only the IP address listed can retrieve
20
Advertisement
Table of Contents
