Table of Contents
Advertisement
proxy server.
Caller ID>
The call ID stand for the phone
Caller ID Mode: Caller ID mode to be used for phone (FSK
Bellcore/FSK ETSI/DTMF)
Polarity Reverse before caller ID: start polarity reverse before
send the caller ID
Dual tone before caller ID: Send dual tone before caller ID (for FSK
ETSI use only)
Caller ID present: The timing to send the caller ID
(Before first ring/after first ring/after first short ring)
DTMF caller ID start digit: specify the DTMF caller ID start digit
(default is D, the range is A to D)
DTMF caller ID stop digit: specify the DTMF caller ID start digit
(default is C, the range is A to D)
Others>
Flash time and current drop generation/detection time
Min flash time(80~800msec): Specify the value of the flash (low),
If the phone-set's flash time is shorter than the Flash Low setting, the
flash will be ignored.
MAX flash time (80~800msec): Specify the value of the flash
(high), If the phone-set's flash time is longer than the Flash high
setting, the flash will be handled as hang-up.
Current Drop Times (msec): Specify the value of the current drop
times (generate – for FXS / detect – for FXO).
48
Advertisement
Table of Contents
