Rear Panel - Dynamix FXS-04 User Manual

Rear Panel:

Dynamix FXO-04, FXS-04
Item
Reset
L1-L4
(FXO Gateway
Only)
T1-T4
(FXS Gateway
Only)
LAN
WAN
DC 12V
Description
Press and hold over 5 seconds to reload factory default
setting, this will erase all existing settings configured on
this gateway.
The status LED for FXO port 1-4. When there is no PSTN
line connected, this LED will become blinking to remind
you. When PSTN line is connected and no talking, the LED
will be off. When a line is using, the LED will become
steady light up. ( FXO-04 only)
The status LED for FXS port 1-4, this will light up amber
orange when the connected phone's handset is lifted, or
when the connected phone is engaged in a conversation.
It will flash amber orange when there is an incoming call.
( FXS-04 only)
10/100 Base-T RJ-45 socket for LAN port , connects to PC
for management purpose.
10/100 Base-T RJ-45 socket for WAN port, connects to
wide area network.
The power socket, input AC 100V~240V; output DC12V,
1.5A
6