Table of Contents
Advertisement
For FXS>
Incoming Call Type: Incoming call type
Matched Prefix: matched DNIS (called number) prefix
Matched Incoming List: matched DNIS incoming interface target
Matched Length: matched DNIS (called number) length. For ignoring
the length, please set to 0.
No Answer Timeout: How long the hunting will continue to next
when the called target doesn't answer.
Create Route Plan>Primary Route
Outgoing Type: Outgoing call type (FXS or VOIP)
Hunting Type: The hunting method will be used for this route.
DM Group: Select DM group 1 to 4 in case it requires a DM (for
example remove the prefix) before to make the call.
VOIP: The incoming SIP call type
FXS: The FXS extensions incoming call type
For VOIP incoming call type, the incoming target will be
the SIP trunk ID. Only the call from the selected SIP
Trunk will be accepted for this route.
For FXS incoming call type, the incoming target will be
the line ID (T1 to T4). Only the call is coming from the
selected line will be accepted for this route.
Priority Ring: The call will be hunted based on the
routing list order one by one.
Cyclic Ring: The call will be hunted based on the cyclic
basis. This is the recommended method.
Routing List:
The routing target list will be used for this route.
56
Advertisement
Table of Contents
