Installing A 3.5-Inch Or 2.5-Inch Hard Drive - HP EliteDesk 800 G1 Tower Service Manual

4.
Release the drive by pulling the release tab away from the drive (1) and sliding the drive out of the
bay (2).
5.
Remove the four guide screws (two on each side) from the old drive. You will need these screws to
install a new drive.

Installing a 3.5-inch or 2.5-inch hard drive

1. Prepare the computer for disassembly
2. Remove the access panel
(Preparation for disassembly on page
(Access panel on page 45)
44)
Drives
71