HP EliteDesk 800 G1 Tower Service Manual page 114

4. Open both latches of the memory module socket (1), and insert the memory module into the
socket (2).
NOTE:
the tab on the memory socket.
Populate the black DIMM sockets before the white DIMM sockets.
For maximum performance, populate the sockets so that the memory capacity is spread as equally
as possible between Channel A and Channel B. Refer to
for more information.
5.
Push the module down into the socket, ensuring that the module is fully inserted and properly
seated. Make sure the latches are in the closed position (3).
6.
Repeat steps 4 and 5 to install any additional modules.
The computer should automatically recognize the additional memory the next time you turn on the
computer.
102 Chapter 6 Removal and replacement procedures: Small Form Factor (SFF)
A memory module can be installed in only one way. Match the notch on the module with
Populating DIMM sockets on page 100