Expansion Cards - HP EliteDesk 800 G1 Tower Service Manual

Expansion cards

Description
nVidia Quadro NVS310 PCIe x16 graphics card, 512 MB
nVidia Quadro NVS315 PCIe x16 graphics card, 1 GB
AMD Radeon HD8490 PCIe x16 graphics card, 1 GB
AMD Radeon HD8470 PCIe x16 graphics card, 2 GB DDR3
AMD Radeon HD 8350 1GB PCIe x16 DH GFX
GeForce GT630 PCIe x16 graphics card, 2 GB
Intel PRO/1000 single port GbE NIC, includes bracket
HP PCI expansion slot daughter card
The computer has two PCI Express x1 expansion slots, one PCI Express x16 expansion slot, and one
PCI Express x16 expansion slot that is downshifted to a x4 slot. Some models also have an optional
standard PCI expansion slot.
NOTE: You can install a PCI Express x1, x8, or x16 expansion card in the PCI Express x16 slots.
For dual graphics card configurations, the first (primary) card must be installed in the PCI Express x16
slot that is NOT downshifted to a x4.
You can add the optional standard PCI expansion slot to the system board by purchasing a PCI
extender board from HP.
To remove, replace, or add an expansion card:
1.
Prepare the computer for disassembly
2. Remove the access panel
3. Locate the correct vacant expansion socket on the system board and the corresponding expansion
slot on the back of the computer chassis.
(Preparation for disassembly on page
(Access panel on page 45)
Spare part number
707252-001
720837-001
717219-001
729085-001
717220-001
702084-001
728562-001
696971-001
44).
Expansion cards
53