Usdt Specifications - HP EliteDesk 800 G1 Tower Service Manual

USDT specifications

Chassis
Height
Width
Depth
(depth will increase if the computer is equipped with a port security bracket)
Approximate Weight
Weight Supported (maximum distributed load in desktop position)
Temperature Range (values subject to change with increasing altitude above
sea level)
Operating
Nonoperating
NOTE:
Operating temperature is derated 1.0° C per 300 m (1,000 ft) to 3,000 m (10,000 ft) above sea level, no direct
sustained sunlight. Maximum rate of change is 10° C (50° F)/Hr. The upper limit may be limited by the type and number of
options installed.
Relative Humidity (noncondensing)
Operating (28° C (82.4° F) max wet bulb)
Nonoperating (38.7° C (101.66° F) max wet bulb)
Maximum Altitude (unpressurized)
Operating
Nonoperating
Power Supply
Operating Voltage Range
Rated Voltage Range
Rated Line Frequency
Operating Line Frequency
Rated Input Current
This system utilizes an active power factor corrected external power supply. This allows the system to pass the CE mark
1
requirements for use in the countries of the European Union. The active power factor corrected power supply also has the
added benefit of not requiring an input voltage range select switch.
276 Appendix C Specifications
1
2.60 in 6.6 cm
9.90 in 25.1 cm
10.00 in 25.4 cm
6.8 lb 3.1 kg
77 lb 35 kg
50° to 95° F 10° to 35° C
-22° to 140° F -30° to 60° C
10-90% 10-90%
5-95% 5-95%
10,000 ft 3,048 m
30,000 ft 9,144 m
90-264 VAC
100-240 VAC
50-60 Hz
47-63 Hz
N/A