Bezel Blank - HP EliteDesk 800 G1 Tower Service Manual

Bezel blank

Description
Optical drive bezel blank
On some models, there is a bezel blank covering the slim optical drive bay that needs to be removed
before installing a slim optical drive. To remove a bezel blank:
1. Remove the access panel
2. Remove the front bezel
3. To remove the bezel blank, press inward on the six retaining tabs (1) and pull the blank off the
front bezel (2).
NOTE:
can install an optional bezel trim piece (available from HP) that surrounds the front of the slim
optical drive.
(Access panel on page
(Front bezel on page
After removing the slim optical drive bezel blank and installing a slim optical drive, you
142).
143).
Spare part number
732771-001
Bezel blank
145