Download  Print this page

HP EliteDesk 800 G1 Disassembly Instructions Manual

Small form factor business pc.
Hide thumbs
   

Advertisement

Product End-of-Life Disassembly Instructions
Product Category: Personal Computers
Marketing Name / Model
[List multiple models if applicable.]
HP EliteDesk 800 G1 Small Form Factor Business PC
Purpose: The document is intended for use by end-of-life recyclers or treatment facilities. It provides the basic
instructions for the disassembly of HP products to remove components and materials requiring selective treatment ,as
defined by EU directive 2002/96/EC,Waste Electrical and Electronic Equipment (WEEE)
1.0 Items Requiring Selective
Treatment
1.1 Items listed below are classified as requiring selective treatment.
1.2 Enter the quantity of items contained within the product which require selective treatment in the right column, as
applicable.
Item Description
Printed Circuit Boards (PCB) or Printed Circuit
Assemblies (PCA)
Batteries
Mercury-containing components
Liquid Crystal Displays (LCD) with a surface
greater than 100 sq cm
Cathode Ray Tubes (CRT)
Capacitors / condensers (Containing PCB/PCT)
Electrolytic Capacitors / Condensers measuring
greater than 2.5 cm in diameter or height
External electrical cables and cords
Gas Discharge Lamps
Plastics containing Brominated Flame Retardants
weighing > 25 grams (not including PCBs or PCAs
already listed as a separate item above)
Components and parts containing toner and ink
including liquids, semi-liquids (gel/paste) and toner
Components and waste containing asbestos
EL-MF877-00
Template Revision B
Notes
With a surface greater than 10 sq cm
PCA
All types including standard alkaline and lithium
coin or button style batteries Yes
For example, mercury in lamps, display
backlights, scanner lamps, switches, batteries
Includes background illuminated displays with gas
discharge lamps
Liteon 320W STD PSU
Yes
Include the cartridges, print heads, tubes, vent
chambers, and service stations.
PSG instructions for this template are available at
EL-MF877-01
Quantity
of items
included
in product
3
1
5
1
Page 1

Advertisement

Table of Contents

   Summary of Contents for HP EliteDesk 800 G1

  • Page 1 Purpose: The document is intended for use by end-of-life recyclers or treatment facilities. It provides the basic instructions for the disassembly of HP products to remove components and materials requiring selective treatment ,as defined by EU directive 2002/96/EC,Waste Electrical and Electronic Equipment (WEEE) 1.0 Items Requiring Selective...
  • Page 2 Components, parts and materials containing refractory ceramic fibers Components, parts and materials containing radioactive substances 2.0 Tools Required List the type and size of the tools that would typically be used to disassemble the product to a point where components and materials requiring selective treatment can be removed. Tool Description Tool Size (if applicable)
  • Page 3 Figure1 Remove the Access Panel Figure2 Disconnect PSU cables from the board Figure3 Disconnect the ODD/HDD PSU cables Figure4 Disconnect the slim ODD cables Figure5 Disconnect the cables from the HDD Figure6 Disconnect the CPU HeatSink cable EL-MF877-00 Page 3 Template Revision B PSG instructions for this template are available at EL-MF877-01...
  • Page 4 Figure7 Disconnect the Front IO cable Figure8 Remove the HDD from cage Figure9 Remove the slim ODD from cage Figure10 Remove the ODD from cage Figure11 Remove the Memory from the board Figure12 Loose the screws from the CPU HeatSink EL-MF877-00 Page 4 Template Revision B...
  • Page 5 Figure13 Remove the CPU HeatSink from the board Figure14 Loose the screws from the CPU HeatSink Figure16 Rotate the handle and open it up igure15 Remove the fan from CPU HeatSink Figure17 Remove the CPU from the board Figure18 Remove the battery from the system board EL-MF877-00 Page 5 Template Revision B...
  • Page 6 Figure19 Loose the stone card screws Figure20 Remove the stone card from MB Figure21 Loose the screws from board Figure22 Remove M/B from chassis Figure23 Loose the screws from system fan Figure24 Remove system fan EL-MF877-00 Page 6 Template Revision B PSG instructions for this template are available at EL-MF877-01...
  • Page 7 Figure25 Loose the screws from PSU Figure26 Press the baffle and slide the PSU Figure27 Remove PSU from chassis Figure28 Loose the screws from Speaker Figure29 Remove Speaker Figure30 Remove front bezel EL-MF877-00 Page 7 Template Revision B PSG instructions for this template are available at EL-MF877-01...
  • Page 8 Figure31 Lo oose the scre ew of Front IO Figur re32 Remove e Front IO ca able Figure33 Re emove powe r LED cable Figur re34 Remove e the screws s on the PSU U chassis Figure35 Lif ft the cover o off the power supply Figur...
  • Page 9 Figure37 Remove PSU MB from PSU Chassis Figure38 Show Ele-Cap on PCBA (Liteon 320W STD) Figure39 Remove Ele-Cap from PCBA Figure40 Remove Ele-Cap from PCBA EL-MF877-00 Page 9 Template Revision B PSG instructions for this template are available at EL-MF877-01...

This manual is also suitable for:

Elitedesk 880 g1

Comments to this Manuals

Symbols: 0
Latest comments: